Toshiba 50L2200U User Manual

28
Connecting Your TV
HDMI® CEC connection
To ensure that the HDMI
®
or DVI device is reset properly:
❖ When turning on your electronic components, turn on the TV
first, and then the HDMI
®
or DVI device.
❖ When turning off your electronic components, turn off the
HDMI
®
or DVI device first, and then the TV.
EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for reception of
high-definition video signals. Because this is an evolving
technology, it is possible that some devices may not operate properly
with the TV.
HDMI
®
CEC connection
You can control the basic functions of connected audio/video
devices using the TV’s remote control if you connect a
HDMI
®
CEC compatible audio receiver or playback device. The
HDMI
®
CEC Control feature uses CEC technology as regulated by
the HDMI
®
standard.
(Sample Illustration) HDMI
®
CEC compatible audio receiver and
playback device connections
To connect an HDMI
®
device, you will need one HDMI
®
cable
(type A connector) per HDMI
®
device (see “Overview of cable
types” on page 20).
NOTE
NOTE
2
1
p
TV back panel
Playback device
(
HDMI
®
CEC DVD player, etc.)
Playback device
(
HDMI
®
CEC DVD player, etc.)
Audio receiver

Toshiba 50L2200U Specifications

General

3D	No
Display diagonal	50 \
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	-
Display diagonal (metric)	125.7 cm
RMS rated power	14 W
USB 2.0 ports quantity	1
Consumer Electronics Control (CEC)	Anynet+
Product color	Black
Panel mounting interface	400 x 400 mm
Power consumption (standby)	0.2 W
Power consumption (typical)	91 W
Sustainability certificates	ENERGY STAR
Package weight	25990 g

Weight and Dimensions

Depth (with stand)	287 mm
Height (with stand)	764.5 mm
Weight (with stand)	20500 g
Depth (without stand)	99.06 mm
Width (without stand)	1161 mm
Height (without stand)	716.3 mm
Weight (without stand)	18780 g