Toshiba 50L2200U User Manual

45
Chapter 5
Setting up your TV
Initial Setup
When you first turn on or reset the TV, the Initial Setup window
will appear.
1 In the Menu Language field, press the ( / arrow) buttons to
select your preferred language.
2 Press the ( / arrow) buttons to select Time Zone Setup.
Then set your desired time zone, using the ( / arrow)
buttons and press the ENTER button.
The Location settings window appears.
3 For normal home use, press the ( / arrow) buttons to select
Home, and then press the ENTER button.
The ANT/CABLE In setup window appears.
4 Press the ( / arrow) buttons to select the input source
(Cable or Antenna), and then press ENTER.
5 Press the ENTER button to select Start Scan and continue
with the Auto Tuning.
You can stop the Initial Setup by pressing the EXIT button.
However if you do not finish the entire Initial Setup process and
press the POWER button before completing all the steps, the Initial
Setup window will appear every time you turn on the TV until
initial setup is complete.

Toshiba 50L2200U Specifications

General

3D	No
Display diagonal	50 \
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	-
Display diagonal (metric)	125.7 cm
RMS rated power	14 W
USB 2.0 ports quantity	1
Consumer Electronics Control (CEC)	Anynet+
Product color	Black
Panel mounting interface	400 x 400 mm
Power consumption (standby)	0.2 W
Power consumption (typical)	91 W
Sustainability certificates	ENERGY STAR
Package weight	25990 g

Weight and Dimensions

Depth (with stand)	287 mm
Height (with stand)	764.5 mm
Weight (with stand)	20500 g
Depth (without stand)	99.06 mm
Width (without stand)	1161 mm
Height (without stand)	716.3 mm
Weight (without stand)	18780 g