Toshiba 50L2200U User Manual

52
Setting up your TV
Viewing the digital signal meter
mode.) See “Connecting an HDMI® or DVI device to the
HDMI® input” on page 26.
(Sample Illustration) HDMI
®
Audio mode selection
4 To save the setting, highlight Done, and then press the
ENTER button.
Because the PC and HDMI 1 inputs share the same set of analog
audio inputs, the PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No” the HDMI 1 Audio
setting changes to “Auto.” If PC Audio is set to “Yes” the HDMI 1
Audio setting is set to “Digital” and is grayed out in the menu. See
“Setting the PC Audio” on page 94.
Viewing the digital signal meter
You can view the digital signal meter in the ANT/CABLE digital
TV input source only.
To view the digital signal meter:
1 Press the MENU button and open the Setup menu.
Mode: Description:
Auto
When viewing the HDMI 1 input, if digital audio from the HDMI
®
input is available, it will be output. If not, the TV will automatically
detect and output analog audio from the PC Audio input.
Digital
When viewing the HDMI 1 input, digital audio from the HDMI
®
input will be output.
Analog
When viewing the HDMI 1 input, analog audio from the PC Audio
input will be output.
NOTE

Toshiba 50L2200U Specifications

General

3D	No
Display diagonal	50 \
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	-
Display diagonal (metric)	125.7 cm
RMS rated power	14 W
USB 2.0 ports quantity	1
Consumer Electronics Control (CEC)	Anynet+
Product color	Black
Panel mounting interface	400 x 400 mm
Power consumption (standby)	0.2 W
Power consumption (typical)	91 W
Sustainability certificates	ENERGY STAR
Package weight	25990 g

Weight and Dimensions

Depth (with stand)	287 mm
Height (with stand)	764.5 mm
Weight (with stand)	20500 g
Depth (without stand)	99.06 mm
Width (without stand)	1161 mm
Height (without stand)	716.3 mm
Weight (without stand)	18780 g