94
Using the TV’s features
Using the PC settings feature
If a computer is not connected or there is no PC input signal, this
feature will be grayed out in the Setup menu.
4 Press the ( / arrow) buttons to select an item.
5 Press the ( / arrow) buttons to make the appropriate
adjustments.
(Sample Illustration) PC Settings - adjustments screen
The screen is disrupted momentarily while adjusting the PC settings.
This is not a sign of malfunction.
* The default settings and/or adjustment ranges may vary depending on the
input signal format.
Setting the PC Audio
You can output or mute sound from your computer when
connecting it to your TV using the PC IN terminal and an analog
RGB cable, see “Connecting a computer to the TV’s PC IN
terminal” on page 32.
To set the PC Audio:
1 Press the MENU button and open the Sound menu.
Mode: Description:
Horizontal Position Moves the picture left/right. The adjustment range is within ±10 from
center.*
Vertical Position Moves the picture up/down. The adjustment range is within ±10 from
center.*
Clock Phase Helps to reduce noise and sharpen the picture. The adjustment range is
within ±16 from center.*
Sampling Clocks Helps to reduce noise and minimize periodic vertical stripes on the
screen. The adjustment range is within ±10 from center.*
Reset Highlight this item, and then press the ENTER button to get an
optimum adjustment automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
