80
Using the TV’s features
Adjusting the audio
To listen to an alternate language on an ATSC digital station (if
available), highlight the Language field in step 3 above, and then
press the ( / arrow) buttons to select the language you prefer.
To listen to a second audio program on an analog station, if
available, select SAP in step 3 above.
❖ A second audio program (SAP) can be heard only on those TV
stations that offer it. For example, a station might broadcast
another language as a second audio program. If you have SAP
on, you will see the current program on the screen but hear the
other language instead of the program’s normal audio.
❖ If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal
audio will be output. However, occasionally there is no sound at
all in SAP mode. If this happens, set the MTS feature to Stereo
mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble and
balance.
To adjust the audio quality:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Settings, and then press the ENTER button.
3 Press the ( / arrow) buttons to highlight the item you wish
to adjust (Bass, Treble, or Balance).
4 Press the ( / arrow) buttons to adjust the level.
❖ makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
❖ makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
5 To save the new settings, highlight Done, and then press the
ENTER button.
To reset the settings to the factory defaults, highlight Reset,
and then press the ENTER button.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
