Toshiba e-studio2007 User Manual

1 PREPARATION
28 Preparation 2 - Loading Paper
2
Pull the paper holding lever out, and then load paper face down and straight on the
bypass tray.
The printable side may be noted on its packaging.
3
Align the side guides with the edges of the paper, and then push back the lever.
 Up to 100 sheets of plain paper (80 g/m
2
or 20 lb. Bond) can be loaded. Be sure that the height of the
stacked paper does not exceed the indicators of the side guides. If paper other than plain is used, set it one
sheet at a time.
 Fan the paper well before loading it on the bypass tray, otherwise multiple feeding could occur. Be careful
not to cut your fingers.
 Do not push the paper forcibly into the entrance of the bypass feeder, otherwise it could cause a paper
misfeed.
When you use paper longer than the bypass tray size, pull out the paper holder from the tray.
2
1
2
1

Toshiba e-studio2007 Specifications

General

Brand	Toshiba
Model	e-studio2007
Category	All in One Printer
Language	English