2 COPY FUNCTIONS
58 Copy Settings
Copying on both sides
You can copy 1-sided or 2-sided originals on the both side of paper.
For double-sided printing, use plain paper (64 to 80g/m
2
).
1
Press [COPY].
2
Press or to select the item displayed on the LCD screen, and then press .
3
Press or to select the item for copying on both sides, and then press .
4
Press or to select the finishing mode, and then press [OK]. Select “BOOK” for
“open to left”, or “TABLET” for “open to top”.
When placing the original on the original glass
After the first original is scanned, the LCD screen shows “NEXT ORIGINAL?”.
Make sure that “SCAN NEXT PAGE” is selected, place the next original on the original glass, and then press [OK] or
[START]. When all the originals have been scanned, select “FINISHED”, and then press [OK] or [START].
“CANCEL JOB?” is displayed if there is no operation for a certain period.
Menu Functions Settings Description
2-SIDED 1 > 1 SIMPLEX 1-sided original -> 1-sided copy. ( P. 57 )
1 > 2 DUPLEX 1-sided original -> 2-sided copy.
2 > 2 DUPLEX 2-sided original -> 2-sided copy.
2 > 1 SPLIT 2-sided original -> 1-sided copy. ( P. 5 7)
A4
1
READY
100%
IMAGE SHIFT:OFF
1 > 1 SIMPLEX
To Next Page
Loading...
Need help?
General
