110
Learning the Basics
Using the CD-RW/DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
4 Grasp the tray and pull it fully open.
Sample drive tray fully extended
5 Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in “Caring for
CD or DVD Discs” on page 115.
6 Place the disc carefully in the disc tray, label side up.
Sample positioning the disc in the drive
7 Gently press the disc onto the center spindle until you
feel it click into place.
Handle DVDs and CDs carefully, making contact only with the
center hole and edge. Do not touch the surface of the disc. Do
not stack discs. If you incorrectly handle the discs, you could
lose data.
To Next Page
Loading...
Need help?
General