109
Learning the Basics
Using the CD-RW/DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
Do not press the eject button or turn off the computer while the
Drive in-use indicator light is glowing. Doing so could
damage the disc or the drive.
When the disc tray is open, be careful not to touch the lens or
the area around it. Doing so could cause the drive to
malfunction.
Manual eject hole—Use if you need to release the disc tray
when the power is off. Use a straightened paper clip or other
narrow object to press the manual eject button located inside
the hole.
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
Inserting a compact disc
To insert a compact disc into the drive:
1 Make sure the computer is turned on.
2 Make sure the in-use indicator light is off.
3 Press the drive’s eject button.
The disc tray slides partially out of the drive (about
1inch).
HINT: The drive will not open if the computer’s power is off.
To Next Page
Loading...
Need help?
General