E6582175
F-1
6
6. Other parameters
Extended parameters are provided for sophisticated operation, fine adjustment and other special purposes. Modify
parameter settings as required. Refer to section 11 tables of parameters.
Refer to the corresponding sections regarding the following parameters.
Title Function Reference
aul
Overload characteristic selection
5.6, 6.18
fmsl Meter selection
5.1
fm Meter adjustment gain
acc
Acceleration time 1
5.2
dec
Deceleration time 1
fh
Maximum frequency
5.3
ul
Upper limit frequency
5.4
ll
Lower limit frequency
vl
Base frequency 1
5.5
vlv
Base frequency voltage 1
thr
Motor electronic-thermal protection level 1
5.6
olm
Electronic-thermal protection characteristic selection
sr0-sr7 Preset-speed frequency 0-7 5.7
fpid Set value of PID control 6.24
typ
Default setting
4.3.2
set
Checking the region setting
4.4
psel
EASY key mode selection
4.5
gru Automatic edit function 4.3.1
f200 Frequency priority selection
5.8
f207 Frequency setting mode selection 2
f287-f294 Preset-speed frequency 8-15 5.7
f301 Auto-restart control selection 5.9
f519 Setting of acceleration/deceleration time unit 5.2
f607 Motor 150% overload detection time
5.6
f631 Inverter overload detection method
f632 Electronic-thermal memory
f657 Overload alarm level
f701 Current/voltage unit selection 5.10.1
f702
Frequency free unit display magnification
5.10.2
f703
Frequency free unit coverage selection
f705
Inclination characteristic of free unit display
f706
Free unit display bias
f724
Operation frequency setting target by setting dial
5.7
f750
EASY key function selection
4.5
f751-f782
Easy setting mode parameter 1-32
To Next Page
Loading...
Need help?
General