E6582175
L-5
12
MODE
S
TA
T
US
RUN
RUN
EASY
STOP
PRG
MON
%
Hz
5
6
13013
7.5
45
58
D
R2.5
H1 (Mounting dimension)
60(Mounting
dimension)
72
VF-S15
EMC plate
(Option)
Note 2)
STATU
S
RUN
RUN
EASY
STOP
PRG
MON
%
Hz
M
OD
E
5
5
130
H2
7.5
46
59*
D
R2.5
W
VF-S15
121.5 (Mounting dimension)
93(Mounting dimension)
EMC plate
(Option)
Note 2)
6.5
170
14
7.5
44
58
D
7
140
VF-S15
157 (Mounting dimension)
126(Mounting dimension)
EMC plate
(Option)
Note 2)
2- 5
2-R2.5
Outline drawing
Fig.A Fig.B
Fig.C
Note 1 To make it easier to grasp the dimensions of each
inverter, dimensions common to all inverters in these
figures are shown with numeric values but not with
symbols.
Here are the meanings of the symbols used.
W: Width, H: Height, D: Depth
W1: Mounting dimension (horizontal)
H1: Mounting dimension (vertical)
H2: Height of EMC plate mounting area
D2: Depth of setting dial
A1: Mounting dimension (horizontal) from left side
A2: Mounting dimension (horizontal) from right side
Note 2. Here are the available EMC plates.
Fig.A : EMP007Z
Fig.B : EMP008Z
Fig.C : EMP008Z for 3-phase 500V-2.2/4.0kW models
EMP009Z for 3-phase 200V-4.0kW model
Fig.D : EMP010Z
Fig.E : EMP011Z
Note 3. The models shown in Fig. A and Fig. B are fixed at two
points: in the upper left and lower right corners.
Note 4. The model shown in Fig. A is not equipped with a
cooling fan.
Note 5. The cooling fan of 1-phase 240V-1.5, 2.2kW models
are on the upper side of the inverter.
*58mm for 1-phase 240V-
1.5, 2.2kW models.
*Above dimension is the
size of EMP009Z, 45mm
and 59mm for EMP008Z.
To Next Page
Loading...
Need help?
General