90 More features
External call forwarding with a multiple
subscriber number
If your communications system is connected to an ISDN multiple device line,
then you can forward all incoming calls from the public network through your
multiple subscriber number (MSN) to an external destination.
There are three types of forwarding:
• Calls are forwarded immediately (1=immediate call forwarding).
• Calls are forwarded after a certain time (2=unanswered calls).
• Calls are only forwarded when the line is busy (3=when busy).
Activating call forwarding to a "trunk"
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
s t w Select the menu item and confirm.
o w Enter and confirm your own multiple subscriber number.
Either:
s t w Select the menu item and confirm.
Or:
s t w Select the menu item and confirm.
Or:
s t w Select the menu item and confirm.
then:
o Enter the destination number (without the external code).
Save the settings.
Deactivating call forwarding to a "trunk"
Press and hold down the Talk key.
Open the system menu.
s t w Select the menu item and confirm.
s t w Select the menu item and confirm.
o Follow the user guidance system from this point onwards (enter a multiple sub-
scriber number or DID and forwarding type).
w Confirm your entries.
a Press the End call key to end the operation.
To Next Page
Loading...
Need help?
General