Vision MAX Pro User Manual

Operation 43
© 2015 Vision Engraving Systems
23. X-Axis Motor - This motor turns the X-Axis Leadscrew which moves the motion system and spindle
in the X-Axis.
24. Y-Axis Motor - This motor turns the Y-Axis Leadscrew which moves the motion system and spindle
in the X-Axis.
25. X-Axis Bearing Rails - These bearings allow movement and rigidly hold the position of the motion
system in the X-Axis direction.
26. X-Axis Leadscrew - This leadscrew is rotated by the X-Axis motor and drives the motion system and
spindle in the X-Axis.
27. Y-Axis Leadscrew and Bearing Rail - These components provide identical function as the X-Axis
counterparts, except in the Y-Axis direction.

Vision MAX Pro Specifications

General

Brand	Vision
Model	MAX Pro
Category	Engraver
Language	English