Vision MAX Pro User Manual

Operation 73
© 2015 Vision Engraving Systems
3.8 Water Feed System
The Max Pro engraver has an integrated water feed system for use on certain applications, such as
when engraving glass. The water acts as a lubricant and coolant, which provides for smooth and
consistent engraving. Water is held in a reservoir inside the bottom of the machine and is recirculated
via a water pump.
To fill the system, lift and rotate the Water reservoir Cover as shown in the below picture.

Vision MAX Pro Specifications

General

Brand	Vision
Model	MAX Pro
Category	Engraver
Language	English