Vision MAX Pro User Manual

Vision Max Pro User Manual44
© 2015 Vision Engraving Systems
3.2 The Pendant Controls
The Pendant controls all of the movement and speeds of your Vision engraver or router. Below is a
picture of the Pendant. The function of each button is explained below.
XY Speed + and - Buttons - These buttons control the engraving speed of the
machine. You can change the engraving speed depending on the type of material you are engraving
and the type of cutter you are using. If you are using a diamond drag cutter (non-rotating), you can

Vision MAX Pro Specifications

General

Brand	Vision
Model	MAX Pro
Category	Engraver
Language	English