21 - Retaining clip
❑ Check for firm seating
22 - Roller rocker fingers
❑ Before installing, check camshaft axial clearance ⇒ page 100 .
❑ Do not interchange
❑ Check roller bearing for ease of movement.
❑ Oil contact surfaces.
❑ When installing, secure to supporting element using securing clip.
23 - Valve springs
❑ Observe installation position
❑ Removing and installing ⇒ page 116 , Renewing valve stem seals.
24 - Valve spring plate
25 - Valve cotters
Camshaft identification:
Identification between cam pair for cylinders 4 and 5 of respective
camshaft.
Camshaft Identification
A - exhaust camshaft 03H 101 index
B - inlet camshaft 03H 102 index
4.2 Measuring axial play of camshaft
Special tools and workshop equipment required
♦ Universal dial gauge holder - VW 387-
♦ Dial gauge
Test sequence
Perform measurements with support elements and roller rocker
fingers removed.
Install middle bearing cap of respective camshaft.
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
100 Rep. gr.15 - Cylinder head, valve gear
To Next Page
Loading...
Need help?
General
