Volkswagen CC 2012 User Manual

2.3 Removing and installing thermostat
Special tools and workshop equipment required
♦ Hose clamp pliers - VAS 6340-
Removing:
– Remove noise insulation ⇒ General body repairs, exterior;
Rep. gr. 66 ; Noise insulation; Assembly overview - noise in‐
sulation .
– Drain coolant ⇒ page 142 .
– Unscrew bolts -arrows- and remove coolant connection with
coolant hose.
– Remove thermostat from coolant pipe.
Installing:
Note
There should be a metal sleeve -arrow- in the coolant connection.
If this is missing, the coolant connection must be replaced.
– Clean sealing surface for O-ring.
– Insert thermostat into coolant pipe.
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
152 Rep. gr.19 - Cooling

Volkswagen CC 2012 Specifications

General

Brand	Volkswagen
Model	CC 2012
Category	Automobile
Language	English