Volkswagen CC 2012 User Manual

10 - Bolts
❑
Engine mounting to engine support
❑ Renew
❑
60 Nm + 90° (
1
/
4
turn) further
11 - Bolt
❑ Engine mounting to body
❑ Renew
❑
40 Nm + 90° (
1
/
4
turn) further
12 - Pendulum support
❑ Bolt pendulum support to gearbox and then to subframe.
13 - Bolt
❑ Pendulum support to sub-frame
❑ Renew
❑
100 Nm + 90° (
1
/
4
turn) further
14 - Bolts
❑ Gearbox mounting to body
❑ Renew
❑
40 Nm + 90° (
1
/
4
turn) further
15 - Gearbox mounting
16 - Bolts
❑ Gearbox support to gearbox
Specified torque ⇒ Rep. gr. 34 ; Removing and installing gearbox; Specified torques for gearbox .
17 - Gearbox support
18 - Bolts
❑ Gearbox mounting to gearbox support
❑ Renew
❑
60 Nm + 90° (
1
/
4
turn) further
2.2 Removing and installing engine mount‐
ing
Removing
Caution
Observe the following during all assembly work, particularly in
the engine compartment due to the restricted space:
♦ Route lines of any kind and cables so that original routing
is restored.
♦ Ensure that there is sufficient clearance to all moving or
hot components.
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
22 Rep. gr.10 - Removing and installing engine

Volkswagen CC 2012 Specifications

General

Brand	Volkswagen
Model	CC 2012
Category	Automobile
Language	English