♦ Spring-type clip pliers - VAS 6499-
♦ Workshop hoist - VAS 6100-
♦ Multi-point bit - T10061-
♦ Insert tool, 18 mm - T10179-
♦ Hose clamps, up to 25 mm - 3094-
♦ Engine plug set - VAS 6122-
Disconnecting
– Clamp off coolant hoses using hose clamps - 3093- or -3094-
and remove hoses from gearbox oil cooler.
– Seal union of gear oil cooler using suitable bungs/plugs from
engine bung set - VAS 6122- .
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
16 Rep. gr.10 - Removing and installing engine
To Next Page
Loading...
