Special tools and workshop
equipment required
♦ Lifting tackle - 3033-
♦ Workshop hoist - VAS 6100-
♦ Engine and gearbox support - VAS 6095-
♦ Engine support - 3269-
Procedure
– Separate engine and gearbox ⇒ page 15 .
– Attach lifting tackle - 3033- as follows and lift engine off engine
and gearbox jack - VAS 6100- using workshop hoist - V.A.G
1383 A- .
Vibration damper end: position 3.
Flywheel end: position 11.
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
18 Rep. gr.10 - Removing and installing engine
To Next Page
Loading...
Need help?
General
