♦ Fitting tool - T10122-
♦ Extractor hook - T20143-
Removing:
– Removing gearbox ⇒ Rep. gr. 34 ; Removing and installing
gearbox .
– Remove flywheel ⇒ page 36 .
– Fit puller hook - T20143/2- behind sealing lip of oil seal as
shown in illustration.
– Support puller hook - T20143/2- on the cover for the timing
chain and lever sealing ring off in direction of -arrow-.
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
38 Rep. gr.13 - Crankshaft group
To Next Page
Loading...
Need help?
General
