Manual controls on the driver and front passenger seats
Fig. 42 Controls on the left front seat.
¤ Please first read and note the introductory information and heed the WARNINGS
The controls on the front passenger seat mirror those on the driver seat.
There may be manual and electrical controls on the same seat.
fig. 42 Function
ction
(1) Move the front seat for-
ward or back.
Pull the lever up and move the front seat. The front seat
must lock in place after the lever is released!
(2)
Fold the backrest forward
and back into the upright
position.
Folding forward: If necessary, unsnap the safety belt loop
on the seat and guide the belt by hand as it retracts. Pull
the handle and fold the backrest forward while pushing the
seat forward.
Folding back into the upright position: Push the seat all the
way back, and fold the backrest back into the upright
position. The backrest must lock in place!
(3) Lumbar support control. Turn the adjuster wheel.
OR: Pull the lever up or push it down.
(4) Adjust the backrest angle. Lean forward and turn the adjuster wheel forward or back-
ward.
(5) Adjust the seat height. Move the lever several times up or down.
NOTICE
x Do not use the safety belt loop to help fold the front seat backrest up and down. The safety
belt loop could break off or be damaged.
x When adjusting the position of the front seats, make sure that the front seat backrests do
not tilt back so far that they press against the wind blocker (when reclined, for example). This
can damage the wind blocker, especially its locking mechanism.
So as to be able reach their safety belts more easily, the driver and front passenger should make
sure the belts runs through the belt loops before getting into the vehicle, Safety belts.
To Next Page
Loading...
Need help?
General
