7.6 Alternator -C- 1.4l, TSI engine
7.6.1 Assembly overview
1 - Multi-point socket head bolt
❑ 23 Nm
2 - Upper tensioning roller
3 - Valve timing housing
4 - Hexagon flange bolts
❑ 23 Nm
5 - Securing nut battery posi‐
tive cable
❑ 15 Nm
6 - Cross-head screw
❑ 4.5 Nm
7 - Hexagon nut
8 - Washer
9 - Protective cap
10 - Cross-head screws
❑ 2 Nm
11 - Cross-head screw
❑ 2 Nm
12 - Voltage regulator -C1-
❑ Removing and installing
⇒ page 168
13 - Alternator -C-
❑ Removing and installing
⇒ page 90
❑ Checking ⇒ page 89
❑ Securing battery posi‐
tive wire ⇒ page 88
❑ Removing and installing
poly V-belt pulley
⇒ page 163
14 - Poly V-belt
❑ Checking ⇒ page 88
❑ Removing and installing ⇒ Engine; Rep. gr. 13
❑ Poly V-belt routing ⇒ Engine; Rep. gr. 13
15 - Hexagon head flange bolts
❑ 23 Nm
16 - Centring sleeves
❑ Insert in bracket before installing air conditioner compressor
17 - Lower tensioning roller
18 - Bracket
❑ For tensioning element and air conditioner compressor
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
100 Rep. gr.27 - Starter, current supply, CCS