3 Lights and switches in front doors and
B-pillar
3.1 Removing and installing window regula‐
tor switch in front passenger door -
E107-
Note
The window regulator switch in front passenger door -E107- has
an integrated button illumination bulb -L76- , which cannot be re‐
placed separately.
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
♦ When removing and installing components that are in view
(switches, covers, trim), mask off areas where tools ( re‐
moval wedge -VAS 3409- , screwdriver) are used to lever
out those components using commercially available
masking tape.
Removing
– Remove upper part of handle recess from door handle ⇒
General body repairs, interior; Rep. gr. 70 .
– Disconnect connector -arrow-.
– Release the four locking lugs -arrows- and remove window
regulator switch in front passenger door -E107- from installa‐
tion frame.
Installing
Installation is carried out in reverse order of removal.
– When installing, make sure you hear the four locking lugs click
into place.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
392 Rep. gr.96 - Lights, bulbs, switches - interior