– Unclip cover cap -2- from retainers.
– Remove bolts -arrows-.
– Pull fog light housing out of bumper and disconnect connector
-arrow-.
Installing
Carry out installation in the reverse sequence, noting the follow‐
ing:
– Tighten all threaded connections to specified torques
⇒ page 297 .
– Check function of headlight.
– Check fog light settings and adjust ⇒ Maintenance ; Booklet
20.1 ; Descriptions of work .
5.4 Removing and installing fog lights (from
MY2010)
Note
The illustrations show removal and installation for the left fog light.
Caution
♦ Switch off ignition and all electrical consumers
♦ Remove the ignition key.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
5. Fog lights 299