1.2 Assembly overview - windscreen wiper system
1 - Nut
❑ 20 Nm
2 - Joint-free wipers
❑ Removing and installing
⇒ page 190
❑ Adjusting park position
⇒ page 188
3 - Wiper arms
❑ Removing and installing
⇒ page 185
4 - Bolt
❑ 8 Nm
5 - Wiper frame with linkage
❑ Removing and installing
⇒ page 186
6 - Wiper motor -V- with wiper
motor control unit -J400-
❑ Removing from wiper
frame and installing
⇒ page 186
❑ Coding wiper motor
control unit -J400- and
deactivating APP func‐
tion ⇒ page 181
7 - Rubber grommet in bulk‐
head
❑ Observe installation
notes ⇒ page 188
Not illustrated
♦ Wiper motor -V- bolts to wiper frame with linkage – 8 Nm
♦ Wiper motor crank to wiper motor shaft: 18 Nm
1.3 Removing and installing windscreen
wiper system
Caution
When battery -A- is disconnected and reconnected, the pro‐
cedure described in the workshop manual must be strictly
observed ⇒ page 4 .
Special tools and workshop equipment required
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
1. Windscreen wiper system 183