7.17.2 Removing and installing alternator -C-
Special tools and workshop
equipment required
♦ Torque wrench -V.A.G
1331-
♦ Locking pin -T10060 A-
♦ Spring-type clip pliers -VAS
5024 A-
Carry out following procedures:
Removing
– Disconnect battery -A- ⇒ page 4 .
Caution
When battery -A- is disconnected and reconnected, the pro‐
cedure described in the workshop manual must be strictly
observed ⇒ page 4 .
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
7. Alternator C 159