♦ Pop rivet pliers -VAS 5072-
Note
The anti-theft alarm must be deactivated before removing the
alarm horn -H12- ⇒ page 430 .
Caution
♦ Switch off ignition and all electrical consumers.
♦ Remove the ignition key.
Removing
– Remove front right wheel housing liner ⇒ General body re‐
pairs, interior; Rep. gr. 66 .
– Use drill -VAS 5134- and a drill bit (∅ 6 mm) to drill out both
pop rivets -arrows-.
– Release connector -1- by opening the cover -2- using a small
screwdriver and remove the alarm horn -H12- -3- from the
wheel housing.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
Electrical system - Edition 07.2010
436 Rep. gr.96 - Lights, bulbs, switches - interior