Alarm List
NOTICE!
In Glass Cockpit Displays, the faults are listed in
Warning Manager. For information about how to deal
with the fault messages in Warning Manager, see the
integrated Glass Cockpit Operator`s Manual. Go to
Info > Owner`s Manual to see the manual in the
display or download the latest manual on
www.garmin.com.
Information Display
The number of registered faults is displayed in the
Information Display.
1 Press the OK button to navigate to the submenu.
2 If more than one fault is registered, use the arrow
buttons to browse through the fault list.
3 Press the OK button twice to see information about
the cause of the fault and the corrective action.
4
Return to the previous menu by pressing the
button.
Deleting Faults From the List in Information
Display
Acknowledged faults are automatically deleted from
the fault list when the ignition is turned off. Stop the
engine and check that the ignition is turned off at all
helm stations. The faults are still stored in the system
and can be accessed via diagnostic readout by a Volvo
Penta workshop.
When system power is reconnected, any remaining
faults are displayed on the screen.
Faults that have not been remedied must be
acknowledged every time system power is switched
on.
Fault handling
104 47712786 11-2022 © AB VOLVO PENTA
To Next Page
Loading...
Need help?
General
