Maneuvering
Shifting between forward and reverse is done at idling.
Shifting at higher engine speeds can be uncomfortable
for passengers and cause unnecessary stress on the
transmission or cause the engine to stop.
If you attempt to shift gear at a high engine speed, a
safety function is automatically activated, and will
delay shifting until engine speed has fallen to 1000
rpm.
Execute a Forward/Reverse Operation as Follows:
1 Reduce engine speed to idle and let the boat, more
or less, lose way.
WARNING!
Never shift to reverse when the boat is planing.
2 Move the control lever to Neutral (N) with a rapid,
distinct movement. Make a brief pause.
3 Move the control lever to Reverse (R) with a rapid,
distinct movement and increase engine speed.
IMPORTANT:
To avoid water entering the stationary engine via the
exhaust pipe, it is important that all engines are running
during reverse maneuvers.
Activate station
1 Press the STATION button (2) to activate the
station.
The lamp (3) in the control button will light up when
the helm station is active.
Operation
47712786 11-2022 © AB VOLVO PENTA 95
To Next Page
Loading...
Need help?
General
