Joystick calibration, DPI/DPH
1. Move control to
neutral.
2. Turn on the ignition. 3. Start the engines. 4. DOCKING: press
and hold at least 5
seconds.
5. Joystick calibration
started.
6. Buzzer and light
confirm start of
calibration.
7. Compensate boat movements with the Joystick.
8. The boat must move straight abeam. 9. Hold the position and
confirm by pushing
DOCKING
Steady light and buzzer
confirm completed
calibration. Ignition must be
turned off for at least 15
seconds to confirm the
calibration.
Calibration and Settings
47712786 11-2022 © AB VOLVO PENTA 149
To Next Page
Loading...
Need help?
General
