Replacing Battery
IMPORTANT:
Make sure that the new battery fulfills the specifications
in Technical Data. Read the information supplied with
the battery before you begin the installation.
IMPORTANT:
Do not disconnect the batteries with the engine
running.
Sensitive electrical components can be immediately
damaged.
WARNING!
Never confuse the positive and negative poles on the
batteries. Risk of arcing and explosion.
Disconnecting (A)
1 Untighten the nut and remove the – cable (black).
2 Untighten the nut and remove the + cable (red).
Remove the battery.
Connecting (B)
Place the new battery.
1 Connect the + cable (red) to the + pole on the
battery and tighten the nut.
2 Connect the – cable (black) to the – pole on the
battery and tighten the nut.
NOTICE! Hand in the old battery to a re-cycling station.
Reversing gear
The reverse gear is hydraulic, which means that
shifting between ahead/astern and neutral is
performed hydraulically. The reverse gear lubrication
system is equipped with an oil filter and oil cooler. The
reverse gear uses solenoid valves for electronically
controlled shifting.
Volvo Penta recommends that a seawater filter be
fitted to guarantee the correct cooling water flow to the
engine and reverse gear. Otherwise there is a risk of
contaminants in the seawater blocking the reverse
gear cooler and other cooling system components.
Maintenance
47712786 11-2022 © AB VOLVO PENTA 135
To Next Page
Loading...
Need help?
General
