EasyManuals Logo

Volvo B10M User Manual

Volvo B10M
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
118
Service and Maintenance
Front wheel hub, Clutch
Check hub oil level
The oil level should be between the marks on the hub.
Change oil only when working on the hub, if impurities have
entered while exposing or if the oil is discoloured.
Drain and fill through the plug in each hub.
Oil change volume
Approx. 0.3 litres per wheel.
Oil grades
Engine oil SAE 30.
Rear axle gear oil must not be used.
Check clutch fluid level
Check the level at every basic service. The level should be
in the middle of the reservoir.
Change fluid every three years, annually when driving at
altitudes above 2000 m.
Fluid
Use brake fluid complying with DOT 4 (SAE J 1703) require-
ments.
Volvo part. no 1381074.
Change hydraulic fluid in good time!
When under great strain or driving at high altitudes, heat
radiation from the engine and gearbox may cause steam
bubbles in the hydraulic fluid if it is old. The clutch will not
work (no declutch) until the oil has cooled.
Drain/filler plug

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo B10M and is the answer not in the manual?

Volvo B10M Specifications

General IconGeneral
ChassisVolvo B10M
Width2.5 meters
EngineVolvo THD100 series (TD100, TD101, TD102, TD103)
Production Years1978-2003
TransmissionZF, Voith
ConfigurationRear-engined
SuspensionAir suspension

Related product manuals