74
If anything happens
- Air leaks in tubeless tyres must not be rectified by
fitting an inner tube. There is risk of air pockets
forming. These can cause tyre explosion.
- Replace damaged rims.
- Replace damaged tyres. Cuts in the tread can be
repaired provided the repair is carried out in a pro-
fessional manner.
- Make sure the new tyres are approved for the in-
tended weight and speed when changing tyres!
Tyre choice
Load and speed indexes are stamped on the tyres. The index
indicates the highest permitted load and speed for the tyre. In
the example below, (A) is:
156: index for highest load per tyre when single-mounted
150: index for highest load per tyre when dual-mounted
L: speed index
Certain tyres have a further index (B), which indicates that the
tyre may be used with heavier loads at lower speeds, or vice
versa.
Speed index and corresponding permitted max.
speed in km/h.
Load index (Li) and corresponding permitted max.
load per tyre in kg.
Li load Li load Li load
per tyre per tyre per tyre
139 2430 146 3000 153 3650
140 2500 147 3075 154 3750
141 2575 148 3150 155 3875
142 2650 149 3250 156 4000
143 2725 150 3350 157 4125
144 2800 151 3450 158 4250
145 2900 152 3550 159 4375
Speed index E F G J K L M N
Speed 70 80 90 100 110 120 130 140
Section
breadth
in mm
Profile ratio 0.8
(height divided by
section breadth)
Radial
Seat diameter
in inches on rim
Tubeless
Warning!
To Next Page
Loading...
Need help?
General
