31
Temperature gauge (option)
Can be connected in two different ways.
• Gauge in combination with switch.
In one switch position, the exterior temperature will be
displayed; in the other switch position, the interior tem-
perature in the bus will be displayed.
• Gauge displaying only exterior temperature.
Both versions have a warning function for slippery condi-
tions. A lamp in the gauge goes on when the temperature
drops below +2°C.
Clock and tripmeter (option)
Right button:
Select clock or tripmeter function.
Setting the clock when this is displayed. (See also below.)
Hours and minutes can be set with the button. The setting
will change until the button is released.
Left button:
Resetting the tripmeter when this is displayed.
Setting the clock when this is displayed. Press once and the
hours will flash, set the hours with the right-hand button.
Press once more to ”lock” the hours and the minutes will
start to flash. Set the minutes with the right-hand button.
Press a third time to return to normal display.
Instruments and controls
Other instruments and indicator lights
To Next Page
Loading...
Need help?
General
