13
Instruments and controls
Starting switch
Starting switch controls start/stop, voltage feed, indicator
and warning lights. If there is a steering lock, this will be
activated when the key is removed from the starting switch.
0
Neutral position (steering lock and stop position)
R
Radio position
1
Drive position
2
Check position for indicator and warning lights
3
Starting position
Lights off
(alt. day running
lights)
Parking light
Main/dipped beam
Light switch
Switches for parking lights and main/dipped beam for buses
with starting switch. Located on the left-hand side of the
steering wheel on the dashboard.
With the light switch in the 0-position the day running lights,
if fitted, will come on when the starter key is turned to the
drive position. With the switch in the parking light position
the day running lights are not activated (only used when
parking). In the position main/dipped beam, all external
lights will be functional.
P
O
P
O
Start and light controls
To Next Page
Loading...
Need help?
General
