VTech AM18247 User Manual

59
To play and select the default announcement:
1. When the deskset is idle, press ANS SYS.
2. Press or to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press or to scroll to Mailbox On or Announce only, then press
MENU/SELECT or /SKIP.
4. Press or to scroll to Anncment setup, then press MENU/SELECT or
/SKIP.
5. Press MENU/SELECT or /SKIP to choose Default. The default
announcement plays.
6. Press MENU/SELECT or /SKIP to save the setting.
Remote access code
Use this code to select a three-digit number to allow remote access of the
answering system from another telephone. You can change the code to any
number from 000-999. This code is 000 by default.
1. When the deskset is idle, press ANS SYS.
2. Press or to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press or to scroll to Remote access, then press MENU/SELECT or
/SKIP.
4. Use the dialing keys to enter a three-digit remote code.
• Press DELETE to delete a digit.
• Press /REPEAT or /SKIP to move the cursor to the left or right.
5. Press MENU/SELECT to save the setting and return to the previous menu.
To exit without making changes, press CANCEL.
Answering system
Private mailbox setup

VTech AM18247 Specifications

General

Brand	VTech
Model	AM18247
Category	Telephone
Language	English