60
Message Length
Use this feature to set the maximum length of each recorded message. The
caller can record a message up to that specific time period.
1. When the deskset is idle, press ANS SYS.
2. Press or to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press or to scroll to Message length, then press MENU/SELECT or
/SKIP.
4. Press or to choose 1 minute, 2 minutes or 3 minutes.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
Call screening
Use this feature to choose whether incoming messages can be heard over the
speaker when they are being recorded. This feature is set to On by default. You
hear the incoming message on your deskset when a call comes in.
1. When the deskset is idle, press ANS SYS.
2. Press or to scroll to Settings, then press MENU/SELECT or /SKIP.
3. Press or to scroll to Call screening, then press MENU/SELECT or
/SKIP.
4. Press or to choose On or Off.
5. Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
Answering system
Private mailbox setup