52
Telephone operation
Options while on calls
Hold
Use this feature to hold one line while accessing another, or as part of the
conference feature.
While on a call, press HOLD. The corresponding line key
(LINE 1-LINE 4) indicator for the line on hold flashes slowly.
After the call has been put on hold for more than three
minutes, a double beep sounds every 30 seconds.
(To adjust the volume or turn off the reminder beep, see
Hold reminder on page 46).
If you are using the speakerphone, the speakerphone turns off and the
SPEAKER key turns off automatically after you press HOLD. If you are
using the corded headset, the headset turns off and the HEADSET key turns
off automatically after you press HOLD.
To release the hold, press the line key (LINE 1-LINE 4) of the line being put
on hold.
Music on hold (M.O.H.) feature is available. When you put a call on hold, the
caller will hear the music you set in the console. To change the setting and for
more details, see Music on hold on pages 30-32.
Apart from holding outside lines, you can also hold internal intercom calls. See
page 60 for details.
NOTES:
The call privacy setting in Console setup menu remains unchanged after the call is put on hold.
The call ends automatically after it is put on hold for 15 minutes.
Switching between lines
Use this feature to switch between lines during an outside call:
Press the desired line key (LINE 1-LINE 4) of the telephone line you want to
make or answer call. The current call is put on hold automatically.
To return to the first call, press the line key (LINE 1-LINE 4) of the original
call. The second line is put on hold automatically.
•
•
1.
2.
Telephone operation
Options while on calls
To Next Page
Loading...
Need help?
General