85
Answering system
Answering system setup
Message alert tone
Use this feature to turn the audible message alert on or off.
If the message alert tone is on, the console beeps every 10 seconds when
there are new messages in the general mailbox.
When the console is idle, press MENU/SELECT.
Press or to scroll to Ans sys setup, then press MENU/SELECT or
/SKIP.
Press or to scroll to Msg alert tone, then press MENU/SELECT or
/SKIP.
Press or to choose On or Off.
Press MENU/SELECT or /SKIP to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
NOTE: You can press any keys on the console to temporarily silence the message alert tone
when it is playing. The message alert tone resumes when a new message is recorded.
Voice language
This feature allows you to change the language of voice prompts used in the
console and all registered desksets and cordless handsets. By default, the
voice language is set to English.
When the console is idle, press MENU/SELECT.
Press or to scroll to Ans sys setup, then press MENU/SELECT or
/SKIP.
Press or to scroll to Voice language, then press MENU/SELECT or
/SKIP.
Press or to select English or Francais.
Press MENU/SELECT or /SKIP again to save the setting and return to the
previous menu. To exit without making changes, press CANCEL or
/REPEAT.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
To Next Page
Loading...
Need help?
General