SVS-200 Installation, Operation and Maintenance
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
20153-W-03-01 10 Webasto Charging Systems, Inc.
NOTE: We strongly recommend cement curbing, concrete filled steel pipe pillars, or similar
protection to be placed around the SVS-300 to prevent damage to the SVS-300 from a moving
vehicle.
The square mounting holes are 6.5mm X 6.5 mm.
Figure 4- 2 Bolt Pattern for SVS-300 Installation
4.4 Connecting AC (Utility) Power
Prior to connecting the unit to the utility ensure that:
The available grounding connection meets all state and local codes
and the National Electrical Code (NEC).
The main circuit breaker or other “line disconnect” device is within
sight of the unit and is easily accessible to allow complete power
down of the unit.
Incorrect power wire installation, or failure to properly ground unit may
result in a severe shock hazard.
To Next Page
Loading...
Need help?
General
