SVS-200 Installation, Operation and Maintenance
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
20153-W-03-01 16 Webasto Charging Systems, Inc.
5.4 Equalization
Proper equalization is necessary for the health of the pack. Too little equalizing may lead to
sulfation and decreased capacity, whereas excessive equalizing may lead to high water loss and
more maintenance. We recommend equalizing at least once a week, possible more with heavy
usage.
The equalization schedule is stored in the BMID and run automatically (see the “BMID
Programming Manual” for information on how to modify the pre-set equalization schedule). To
manually schedule an equalization during a charge, press the “Equalize” button at any time during
a charge, the equalize light will start flashing indicating an equalization is scheduled, and the
battery pack will be equalized following the fast charge.
To bypass the fast charge and start an equalization charge on a battery pack at any state of
charge, press and hold the “Equalize” button for three (3) seconds, the equalize light will
illuminate without flashing, and the charger will start a partial equalization on the pack without a
fast charge.
Note: The charger EQ button may be configured to only work under certain conditions (EQ day of
week, etc.). Please review the advanced features manual for details.
5.5 Viewing Charge Data Screens
While charging, the display screen is periodically updated with the latest charging data including
voltage, current, and battery state of charge. During and after charging, the following additional
data display screens may be viewed by scrolling between them using the UP and DOWN arrow
keys (see Figure 5- 5). The display will return to the Charging screen if there is no button activity
for 15 seconds.
To Next Page
Loading...
Need help?
General
