上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
6 / 116
After the drive is installed, the system will prompt you for a restart, which means the drive
has been installed successfully.
2.5.2 Manual Installation
After installation of the motion control card and software, if the software cannot open, the
automatic installation of the drive may have failed. After ruling out the possibilities such as
poor contact of the control card, install the drive manually.
Taking a Win7 system as an example, follow the steps below to manually install the drive:
1. Right-click on Computer, click Manage:
o First-time manual drive update: In the left list, click Device Manager. Go to
Action > Scan for hardware changes in the menu bar or click the Scan for
hardware changes icon under the menu bar. In the right list under Other
devices, click the network and computer encryption and decryption controller
option.
o Non-first manual drive update: In the left list, click Device Manager. In the
right list under motion controller, click the WEIHONG motion controller (PM
series) option.
2. Follow the steps below to find the INF configuration file:
a. In the displayed dialog box, browse the computer to find the drive program.
b. Click the option of selecting from the computer device program list.
c. Click Install From Disk. The Install From Disk dialog box is displayed.
d. Click Browse.
e. In the file searching dialog box, find the file and click Open.
The file storage path is C:\Program
Files\Weihong\NcStudio\Bin\DriverCH365.
3. In the displayed Windows security dialog box, click Install.
After installing the drive manually, restart the system as prompted.
To Next Page
Loading...
Need help?
General
