Note
The 1-Tray OHCF is not available with D136 configurations.
Interface Module (D110/D125 configurations)
The Interface Module is required with many finishing devices. It enables communication
and provides a paper path between the print engine and any attached finishing device
or devices.
Note
The Interface Module is not available with the D95 Copier/Printer configuration.
Interface (Cooling) Module (D136 configuration)
The Interface Cooling Module is required for all D136 configurations. It is similar in
function to the Interface Module (for D110/D125 configurations), but it also aids in
cooling the outgoing printed media through the use of additional fans and associated
duct work.
1-9Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Product Overview
To Next Page
Loading...
Need help?
General