Note
If paper is torn, check inside the machine and remove it.
3. Fan the paper you removed, making sure that all four corners are neatly aligned, and
then load them again.
4. Push cover 1e until you hear it click into place.
Note
A message is displayed and the machine does not operate if the cover is open even
slightly.
Paper jams inside the finisher left cover
Paper jams at lever 1a and knob 1c
1. Make sure that the machine has stopped printing.
2. Open the finisher left cover.
User Guide24-14
Standard Finisher Plus
To Next Page
Loading...
Need help?
General