4. Close the HCS Front Cover.
5. Press the Unload button on the HCS control panel.
Wait until the Unload indicator lights and then open the HCS front door.
6. Open the front door after the Unload indicator lights.
7. Pull out the stacker cart and gently remove the jammed paper.
8. Push the stacker cart straight into the HCS.
9. Close the front door.
10. If the UI indicates there is a jam in the print engine, follow the instructions on the
screen to remove any paper in the area indicated.
11. Follow the instructions displayed on the UI to resume printing.
HCS top tray jam (E7)
Perform the following steps to clear the jam and resume printing:
1. Remove any output delivered to the Top Tray.
20-7Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
High Capacity Stacker (HCS)
To Next Page
Loading...
Need help?
General