Xerox D125 User Manual

If cuttings/trimmings are present, remove them.
4. Close the book stacker tray.
5. Run a test job to ensure that the binder performs correctly.
Adjusting the printed image and trim
If the printed book is not within the desired parameters, you can adjust the settings
from the system UI.
Fault codes
053-100, 053-101, 053-102, 053-103, 053-104, 053-105, 053-106, 053-107, 053-108,
053-109, 053-110, 053-111, 053-112, 053-113, 053-114, 053-115, 053-116, 053-117,
053-118, 053-119, 053-120, 053-121, 053-122, 053-123, 053-124, 053-125, 053-126,
053-127, 053-128, 053-129, 053-130, 053-131, 053-132, 053-133, 053-134, 053-135,
053-136, 053-137, 053-138, 053-139, 053-140, 053-141, 053-142, 053-143, 053-144,
053-145, 053-146, 053-147, 053-148
Cause: Paper jam
Remedy: Remove the jammed paper; follow the instructions displayed on the system
UI to restart your job.
053-210, 053-211, 053-212, 053-213, 053-214, 053-215, 053-216, 053-217, 053-218,
053-219, 053-220, 053-221, 053-222, 053-223, 053-224, 053-225, 053-226, 053-227,
053-228, 053-229, 053-230, 053-231, 053-232, 053-233, 053-234, 053-235, 053-236,
053-237, 053-238, 053-239, 053-240, 053-241, 053-242, 053-243, 053-244, 053-245,
053-246, 053-247, 053-248, 053-249, 053-250, 053-251, 053-252, 053-253, 053-254,
053-255, 053-256, 053-257, 053-258, 053-259, 053-260, 053-261, 053-262, 053-263,
053-264, 053-265, 053-266, 053-267, 053-268, 053-269, 053-270, 053-271, 053-272,
053-273, 053-274, 053-275, 053-276, 053-277, 053-278, 053-279, 053-280, 053-281,
053-282, 053-283, 053-284, 053-285, 053-286, 053-287, 053-288, 053-289, 053-290,
053-291, 053-292, 053-293, 053-294, 053-295, 053-296, 053-297, 053-298, 053-299
Cause: Internal component failure
Remedy: Power off/on the system.If fault continues, contact the Customer Support
Center.
053-301, 053-302, 053-303, 053-304, 053-305
Cause: A cover or door is open
Remedy: Close the opened cover or door; follow the instructions displayed on the
system’s UI to restart your job.
053-310, 053-311, 053-312, 053-313, 053-314
Cause: Internal component failure
Remedy: Power off/on the system.If fault continues, contact the Customer Support
Center.
User Guide21-28
Perfect Binder (D110/D125/D136 with integrated controller)

Xerox D125 Specifications

General

Brand	Xerox
Model	D125
Category	Printer
Language	English