Xerox DocuMate 4790 User Manual

Xerox DocuMate 4790
User’s Guide
147
• Sensitivity—drag the slider left or right to change the DFD sensitivity level.
• Sensors—if your scanner has multiple DFD sensors, you can turn on or off each of the sensors by
selecting/deselecting the sensors. At least one sensor has to be selected. If your scanner has only
one sensor, that sensor will be selected and grayed out.
Patch codes—select this option to enable patch code detection during scanning. The scanner
recognizes patch codes as follows:
• The front side of the page. A page with a patch code on it must be placed face-up in the
document stack.
• A minimum of 50 mm of clear space from the top of the page to a patch code with horizontal
lines.
• A maximum of 70 mm between the left side of the page and a patch code with vertical lines.
• A minimum of 10 mm of clear space around the patch code.
• The patch code should be a minimum of 9 mm long for best results.
• The scanner can detect Kodak patch codes 2, 3, and T.
There are various types of patch code sheets available on the scanner’s installation disc for you to print
and use.

Xerox DocuMate 4790 Specifications

General

Film scanning	No
Color scanning	Yes
Duplex scanning	-
Input color depth	24 bit
Maximum scan size	297 x 432 mm
Enhanced scan resolution	300 x 300 DPI
Optical scanning resolution	600 x 600 DPI
Display	LCD
Scanner type	Flatbed & ADF scanner
Product color	Blue, White
Sensor type	CCD
Daily duty cycle (max)	10000 pages
Auto document feeder (ADF) input capacity	200 sheets
Minimum scan area (ADF)	48 x 70 mm
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	75 - 80 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	2048 MB
Minimum processor	Intel® Pentium® 4
Minimum storage drive space	350 MB
Compatible operating systems	Windows 7 Windows Vista Windows XP
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	444 mm
Width	468 mm
Height	339 mm
Weight	18000 g