Xerox DocuMate 4790 User Manual

Xerox DocuMate 4790
User’s Guide
54
Scan from the One Touch Button Panel
Scanning from the button panel on your computer’s screen works like pressing a button on the scanner.
The scanner scans the item, then sends the image to the Destination Application indicated by the
button’s icon.
To scan from the One Touch Button panel:
1. Load the documents into the scanner.
2. Click on the One Touch icon in the Windows notification area (at the lower right corner of the
screen.)
3. The One Touch Button Panel opens.
4. Click the button you want to use to scan.
5. The scanner starts scanning and the image is sent to the selected destination for the One Touch
button you are using to scan.
Features of the One Touch Button Panel
The One Touch panel is your on-screen set of controls for the scanner. From the panel you can access
the hardware settings for your scanner and configure the Scan button.
Click on the One Touch icon to open the panel.
One Touch Icon
The Detail View The Hardware View
The Button View

Xerox DocuMate 4790 Specifications

General

Film scanning	No
Color scanning	Yes
Duplex scanning	-
Input color depth	24 bit
Maximum scan size	297 x 432 mm
Enhanced scan resolution	300 x 300 DPI
Optical scanning resolution	600 x 600 DPI
Display	LCD
Scanner type	Flatbed & ADF scanner
Product color	Blue, White
Sensor type	CCD
Daily duty cycle (max)	10000 pages
Auto document feeder (ADF) input capacity	200 sheets
Minimum scan area (ADF)	48 x 70 mm
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	75 - 80 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	2048 MB
Minimum processor	Intel® Pentium® 4
Minimum storage drive space	350 MB
Compatible operating systems	Windows 7 Windows Vista Windows XP
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	444 mm
Width	468 mm
Height	339 mm
Weight	18000 g