Xerox DocuMate 4790
User’s Guide
67
• Back—This is the Duplex side of the page. The area(s) specified for the Back will only apply to the
Duplex side of the page when scanning in Duplex. Therefore, if you scan 4 double-sided pages, the
resulting image file(s) will have redacted areas on pages 2, 4, 6, and 8.
• Both—Select this option if you want to specify an area that appears in the same place on both
sides of the page, such as a company logo, so you don’t have to specify the same area separately
for both the front and back.
Click one time on the default value, 0.00 in each field, to enable the control box for you to input the
start position and redaction area size. The units of measurement is displayed on the lower-right corner
next to the Paper size field.
• From left—Input the upper-left corner start position measured from the left-side of the page.
• From top—Input the upper-left corner start position measured from the top of the page.
• Width—Input the width of the area to be removed.
• Height—Input the height of the area to be removed.
Color—This color field shows the selected fill color for the redacted area(s). When the software
removes the area you specify, it fills the area with the color you have selected here. To change the
color, click the artist palette button to open the Windows color palette. Select the color you want then
click on OK. The color you selected will now display in the Color field on the Redaction Settings tab.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
